1U, 16 Bay E3.SNVMe All Flash Storage Array
High-Density 2U, 24x NVMe All Flash Storage Array, High IOPS
High-Density 1U, 10x NVMe All Flash Storage Array, High IOPS
High-Density 2U, 24x NVMe All Flash Storage Array, High IOPS
High-Density 2U, 24x NVMe All Flash Storage Array, High IOPS
2U, 32 Bay E3.SNVMe All Flash Storage Array
High-Density, High IOPS Performance 2U, 48x 2.5" NVMe All Flash Storage Array
1U, 32 Bay E1.S NVMe All Flash Storage Array
High-Density 1U, 24x Next Generation Small Form Factor Server - Great for Scale-out, Scale-up, Database, Real-time analytics, Deep Learning, Content Distribution Network, etc.
2U, Dual AMD EPYC 9004 Processors, Supports 3x Dual Slot GPU Cards, Ideal for Video Production, Virtualisation & 2000W Reduandant PSU, Supports GRAID, 16x NVMe & 8x NVMe/SATA/SAS Hot Swap Drive Bays.
Broadberry evaluates your applications, performance goals and infrastructure before recommending the right flash storage architecture.
All-flash isn't always the right answer. Broadberry balances application performance, capacity, scalability and budget to recommend the most appropriate storage architecture.
| Workload | Recommended Architecture | Why |
| Databases | All-Flash | Lowest latency and highest transaction performance |
| Virtualisation & VDI | All-Flash | High IOPS and consistent VM performance |
| AI & Analytics | All-Flash | High throughput and low latency for active datasets |
| File Services | Hybrid | Balance performance with cost-effective capacity |
| Mixed Enterprise Workload | Hybrid | Flash performance for active data with lower cost per TB |
Broadberry helps determine the right architecture based on workload performance, capacity and budget requirements.
Flash storage delivers significant performance advantages over traditional disk-based storage for latency-sensitive and high-concurrency workloads.
Broadberry supports a range of enterprise networking options and storage protocols for seamless integration with existing infrastructure.
Broadberry combines workload-led design, enterprise hardware and lifecycle support to deliver flash storage solutions built for performance, reliability and future growth.
Sized around capacity, performance and application requirements.
Enclosure, media, controller and connectivity designed together.
Hardware, firmware, cables and components validated before deployment.
Support from initial configuration through future expansion.
What is the difference between all-flash and hybrid storage?
All-flash arrays use SSDs exclusively to deliver the lowest latency and highest performance. Hybrid systems combine SSDs and HDDs to balance performance, capacity and cost.
Should I choose all-flash or hybrid storage?
All-flash is ideal for applications where latency and performance are the highest priorities. Hybrid storage combines SSD performance with HDD capacity, making it a cost-effective option for mixed workloads.
When should I choose NVMe over SAS SSDs?
NVMe is ideal for latency-sensitive applications requiring the highest throughput and IOPS. SAS SSDs can provide excellent enterprise performance for many business applications at a lower cost.
Can flash storage improve virtualization performance?
Yes. Flash storage reduces latency and improves responsiveness for virtual machines, helping support higher VM densities, faster boot times and more consistent application performance.
Can I expand the system later?
Yes. Broadberry designs flash storage architectures with future expansion in mind, allowing capacity and performance to grow alongside your applications.
What workloads benefit most from flash storage?
Flash storage is ideal for databases, virtualization, VDI, AI and analytics, engineering applications and other workloads that require low latency and high IOPS.
Tell us about your applications, performance goals and growth plans. Broadberry will recommend the right flash storage architecture for your environment.
Discuss Your StorageThe Broadberry CyberStore Performance® range of iSCSI SAN / NAS storage appliances include 1U-4U server offerings boasting up to 288TB of raw storage capacity in a single storage unit providing well over 2 million IOPS.
Built for high performance storage applications, this range boasts ultra-high IOPS by making use of 12Gb/s SAS and NVMe drives with SSD caching options and the latest Intel Xeon processor technology.

Ultra fast iSCSI SAN/NAS storage servers for when performance is key, these enterprise-grade appliances are built to handle whatever you can throw at them.

The recent monumental rise seen in the storage industry over the past few years of virtualization has resulted in the requirement for all flash storage arrays, providing ulta-high IOPS and ultra-low latency for the most demanding storage applications.
The Broadberry Performance range of all flash storage arrays has been built from the ground up for such applications, utilizing the latest solid-state storage technology including SSD drives and NVMe drives.
Unlike many storage solutions on the market today, the Broadberry Performance range of all flash storage arrays have been specifically designed for NVMe drives from the lowest level, meaning there are no bottlenecks even when configured with up to 48 ultra high performance NVMe drives.
As well as increased I/O and lower latency, the Broadberry Performance range of all flash storage arrays also offers substantially reduced running costs due to the ultra-efficient chassis and there being no moving parts.
The CyberStore Performance range has been built from the ground-up to take advantage of the latest high performance storage technology including 12Gb/s SAS3 and NVMe Solid State storage.
Break through the current storage bottleneck between host system and storage media with 12Gb/s SAS, designed and built to provide the connectivity, scalability and performance enterprise need.
12Gb/s Serial Attached SCSI (SAS) technology enables a new performance, class of storage tiering that spans servers with solid state drives to hyperscale datacenter scale-out architectures. The interface doubles the data transfer rate of 6Gb/s SAS solutions, allowing SAS infrastructures to deliver bandwidth that exceeds that of PCI Express® 3.0 with a single host bus adapter (HBA).
Configure your Broadberry CyberStore Performance appliance with NVMe drives and significantly improve both random and sequential performance by reducing latency, enabling high levels of parallelism, and streamlining the command set while providing support for security and end-to-end data protection.
The Broadberry CyberStore Performance range can be configured with a wide range of high-performance storage options, from Hybrid hard drives which incorporate SSD caching technology withing the drive, to ultra-high IOPS NVMe drives.
Seagate Enterprise Performance 15K HDDs leverage a small 2.5-inch form factor to deliver significant performance advantages and power savings over legacy 3.5-inch mission critical drives.
The Intel® Solid-State Drive Data Center Family for PCIe brings extreme data throughput directly to Intel Xeon processors with up to six times faster data transfer speed than 6 Gbps SAS/SATA SSDs.

The performance of a single drive from the Intel SSD Data Center Family for PCIe, specifically the Intel Data Center P3700 Series (460K IOPS), can replace the performance of seven SATA SSDs aggregated through a host bus adapter (HBA) (approximately 500K IOPS).
NVMe overcomes SAS/SATA SSD performance limitations by optimizing hardware and software to take full advantage of NVM SSD technology.
CyberStore Performance storage servers are used by everyone, from small businesses to the largest organizations in the world.
The uses of the CyberStore Performance range are almost infinite due to it's
In today's world, storage appliances are used in almost every aspect of our lives across all market sectors and industries. The flexibility and configurability of Broadberry CyberStore Performance storage servers make them very popular in a wide range of performance-hungry applications.

Buy with confidence knowing all Broadberry CyberServe rack servers are backed up by our 3 year warranty, with further warranty upgrade options available.

Designed for optimal performance, the dual-processor range of CyberStore Performance servers support the Intel Xeon® processor Xeon SP family
Increase the storage capacity of your CyberStore WSS storage appliance by daisy-chaining additional CyberStore JBOD units, giving up to 1 Petabyte of storage.

All Broadberry CyberStore Performance storage servers boast the option of solid-state NVMe storage for ultra-high performance.
Built from the ground up around 12Gb/s SAS storage technology, the CyberStore Performance range raises performance and lowers TCO.

The CyberServe Performance range boasts DDR4 memory, up to twice as fast and delivering 50% more bandwidth and 40% more energy efficiency than DDR3.

All Broadberry CyberStore WSS appliances have built-in iPMI functionality, enabling complete control and management of your server through IP.
All components in the Broadberry CyberStore WSS range are sourced from leading manufacturers who take reliability as seriously as we do.

Expand your storage pools online as and when you need to with the CyberStore WSS' built in Thin Provisioning feature.

Built on Windows Storage Server 2012 R2, the CyberStore WSS range uses the same familiar Windows interface you're used to.
Reduce storage footprint by up to 70% with the CyberStore WSS' deduplication feature , removing duplicates in sets of data and referencing to a single file instead.
The CyberStore WSS range can deduplicate virtual machines, greatly increasing the overall effectiveness of deduplication for VDI implementation.
Workplace Join allows certificate-based authentication and single sign-on to applications and data for personal devices like iPads.
The CyberStore WSS range includes a hardware-based SSD Caching option, allowing you to cache your most used data on super fast SSD's via a RAID controller.
Dynamically move chunks of your most used data between HDDs and super fast SSDs through Windows Storage Server for an alternative to hardware based SSD caching.
Windows Storage Server Work Folders works very similar to Dropbox. Install this role on your CyberStore WSS and get a fully functional secure file replication service.
If you've ever had a disk fail in a RAID array you'll know the rebuild time can take ages, espeically with large disks. WSS 2012 greatly reduces this to less than 1 hour for a 3TB disk.
The CyberStore WSS range can be configured with up to 16 network adaptors for impressive network performance and availability.
Extensive TestingBefore leaving our build and configuration facility, all of our server and storage solutions undergo an extensive 48 hour testing procedure. This, along with the high quality industry leading components ensures all of our systems meet the strictest quality guidelines.
Customization ServiceOur main objective is to offer great value, high quality server and storage solutions, we understand that every company has different requirements and as such are able to offer a complete customization service to provide server and storage solutions that meet your individual needs.
We have established ourselves as one of the biggest storage providers in the US, and since 1989 been trusted as the preferred supplier of server and storage solutions to some of the world's biggest brands, including:
